While choosing the perfect style and finish for your new bathroom shower, don’t forget to consider what lies beneath the surface. Ensure the concealed shower valve and decorative valve trim are fully compatible.
If they are not compatible, you may have to rip your tiles out, have mismatched styles or experience rapid changes in temperature. Knowing what to avoid can protect your bathroom walls and reduce costs on your project.
1. Not Checking Compatibility Between Valve Trim and Valve
This is a very common mistake. Due to different internal valve bodies and cartridges, valve trims may not be compatible with all valves, even if they are in the same range.
In architectural ranges, for example, Kohler Purist Shower Valve Trims are specifically designed to be used with either a Kohler Rite-Temp® Pressure Balanced Valve or a dedicated thermostatic or transfer valve. To prevent delays and costs on your project, be sure to check your exact model number of shower valve and only purchase Kohler shower valve trim sets that match.
2. Choosing the wrong valve type
Choosing the wrong valve type for the way your household uses showers may cause issues when showering:
Pressure Balanced Valves (Rite-Temp® by Kohler) – A single lever allows you to control water volume and temperature. Pressure Balanced Valves compensate for changes in water pressure meaning you won’t get a sudden change in shower temperature if someone flushes a toilet elsewhere in the house
Thermostatic Valves – Two separate controls allow you to manipulate water volume and temperature. You can set the desired temperature and once set, it will remain at that temperature.
If you have multiple outlets in your bathroom (rain shower head, handheld shower, bath spout) and you’re using transfer controls (Kohler Purist Transfer Valve Trim), make sure you have chosen the right type of valve to ensure water flows smoothly from all outlets.
3. Not considering finished wall thickness
Once the concealed shower valve has been fixed into place, the cement backer board, waterproof sheet and tiles will be fixed. If the thickness of your finished tiles (stone/ ceramic) is not taken into consideration by the plumber, your shower valve may be too deep or long.
If your shower valve is too deep, the faceplate and handle of your Kohler shower valves and trim set may not screw correctly onto the cartridge. As a result, you may need to purchase ‘deep wall’ extensions, or you may have to modify your framing after tiling. Be precise with the recommended depth of installation for shower valves, as given by the manufacturer
4. Removing the plaster guard prematurely
All concealed shower valves will come with a plastic plaster guard over the shower valve body. Sometimes during tiling, the plaster guard is removed from the shower valve prematurely. This may expose the sensitive internal brass threads and seal to mortar, dust from grouting and paint splatter. Do not remove the plaster guard until all tiling is finished and clean. Once the system is completely clean, be sure to flush the water supply lines thoroughly before fitting the cartridge and trim
5. Mismatched Finishes Without Integral Service Stops
To maintain a consistent design throughout your bathroom, make sure that your valve and trim matches your basin mixer and accessories. For example, Kohler Purist shower valve trims should be paired with Purist faucets. This will ensure a consistent finish.
Also be sure to install hidden valves with integral service stops. This means that in the future, when the cartridge is being maintained, the water can be turned off from just at the shower valve without having to turn off water to the whole house.
6. Not Ensuring Local Availability
If you purchase Kohler shower valves and trims from an unauthorised retailer, you may lose out on local support and replacement parts. By purchasing from an authorised Kohler Bangladesh showroom, you can be sure that you are getting authentic concealed valves. In addition, you will also be able to get matching valve trim sets, technical guidance on installation and reliable service in the future.
Frequently Asked Questions (FAQs)
1. What is the difference between a shower valve and valve trim?
Shower valves are the mechanical parts installed within your walls. They mix hot and cold water and control the flow of water. Valve trims are the external parts of your shower system. These include the faceplate, lever/handle, and diverter control. These are installed over the shower valve once tiling has been completed.
2. Can I upgrade the trim on my Kohler shower valve without breaking tiles?
Yes, depending on your installed valve. If you have a compatible valve installed (Kohler Rite-Temp®, for example), then you can easily upgrade your external shower faceplate and handle (for example, to Kohler Purist) during a bathroom refresh without having to replace the internal plumbing.
3. Do Kohler shower valve trims include concealed valves?
In most cases, trim kits will be sold separately to concealed valves. This allows plumbers and homeowners to choose the correct connection type for their site (PEX, copper or threaded inlet). Be sure to check if your shower valve trim kit is just the trim, or a complete set.
4. Where can I buy genuine Kohler shower valves and trims in Bangladesh?
Visit an authorised Kohler Bangladesh showroom/ dealer. Here you can view the finishes available on the Kohler Purist shower valve trims and confirm compatibility with product experts. You will also receive warranty-backed products.